Laboratories' Schedules
Spring 2008


Unless otherwise indicated the following laboratories are open for use by all the students of the college of ETCS:

  • ET 315 — This is a computer lab. Software available: ANSYS, EES, LabView, Maple, Multisim, MathCAD, Matlab with its add-on packages (simulink, control systems, data acquisition, dsp blockset, fuzzy logic, instrument control, image processing, system identification, filter design, robust control, signal processing, and others), Visual Studio, etc.
  • ET 307 — This is not an open computer lab. It is an electrical and electronics lab. It is used by the following engineering laboratory courses: ECE 208. The Electrical and Computer Engineering Technology (ECET) department also uses this laboratory.
  • ET 244 — This is a computer lab
  • ET 241 — This is a computer lab.
  • ET 226 — This is not an open computer lab. It is an electrical and electronics lab. It is used by the following engineering laboratory courses: ECE/ME 226, and ECE 406/ENGR 411. The Electrical and Computer Engineering Technology (ECET) department also uses this laboratory.
  • ET 111 — This is not an open computer lab. It is a lab to support several Computer Science courses.
  • ET 109 — This is a computer lab.
  • ET 104 — This is a computer lab. It has the same software as ET 315.

Access to a laboratory outside its schedule

Engineering students please contact Esther. There is a procedure to provide students with access to engineering laboratories 24/7.

Students from other programs should contact their corresponding departments and ask if they can be given this type of access.  

Last modified 01/24/08