Journal Papers — 2006

  1. H. I. Abu-Mulaweh, “Design and Performance of a Thermosiphon Heat Recovery System,” Applied Thermal Engineering, Vol. 26, pp. 471-477, 2006.
  2. H. I. Abu-Mulaweh and D. W. Mueller, “The Determination of the Thermal Conductivity of Fluids,” World Transactions on Engineering and Technology Education, Vol. 5 (3) (2006).
  3. H. I. Abu-Mulaweh, “Engineering Capstone Senior Design,” WTE&TE, Vol. 5, No. 1, pp. 153-157, 2006.
  4. H. I. Abu-Mulaweh and D.W. Mueller, “Correlation Equation for Heat Transfer Coefficients for Circular Pin Fins,” International Journal of Mechanical Engineering Education, Vol. 34, No. 3, 2006.
  5. H. Riedel and B. Kang, “Free Vibration of Elastically Coupled Dual-Span Curved Beams,” Journal of Sound and Vibration, 290, 820-838, 2006.
  6. B. Kang and C. A. Tan, “Nonlinear Response of a Beam Under Distributed Moving Contact Load,” Communications in Nonlinear Science and Numerical Simulation, 11(2), 203-232, 2006.
  7. Y. Liu, A. Hoover and I. Walker, “Handling uncertainty due to the delay between complex sensing and manipulation in an industrial workcell,” Robotica, Vol. 24, No. 6, pp. 697-698, Nov. 2006.
  8. I. Walker, A. Hoover and Y. Liu, “Handling Unpredicted Motion in Industrial Robot Workcells Using Sensor Networks,” Industrial Robot, Vol. 33, No. 1, pp. 56-59, 2006.
  9. D. W. Mueller and H. I. Abu-Mulaweh, “Prediction of Temperature in a Fin Cooled by Natural Convection and Radiation,” Applied Thermal Engineering, Vol. 26, Issues 14-15, pp. 1662-1668, 2006.
  10. D. W. Mueller, Jr. and H. I. Abu-Mulaweh, “Compression of an Ideal Gas with Temperature-Dependent Specific Heat Capacities,” Computers in Education Journal, Vol.XVI (1) January-March (2006).
  11. D. W. Mueller, Jr. and A. L. Crosbie,“Emergent Intensity from a Plane-Parallel Medium Exposed to a Laser Beam: A Comparison of Rayleigh and Isotropic Scattering,” Journal of Quantitative Spectroscopy and Radiative Transfer, 98, 330–357 (2006).
  12. J. Njock Libii, “Design of an experiment to test the effect of dimples on the magnitude of the drag force on a golf ball”, World Transactions on Engineering and Technology Education, Vol. 5, No. 3, 2006.
  13. J. Njock Libii,“Design, analysis and testing of a force sensor for use in teaching and research”, World Transactions on Engineering and Technology Education, Vol.5, No. 1, 2006, pp. 175-178.
  14. E.A. Thompson, "A parallel approach to STAP implementation for fMRI data," Journal of Magnetic Resonance Imaging, February 2006, 23(2):216-221.
  15. E.A. Thompson, E. Harmison, R. Carper, R. Martin, and J. Isaacs, “Robot teleoperation featuring commercially available wireless network cards,” Journal of Network and Computer Applications, January 2006, 29(1):11-24.
  16. G. Wang, “Teach Digital Systems Design through Computer EDA tools and Breadboard Techniques”, Computers in Education Journal -- ASEE, Issue: 2, (April-June), 2006, pp. 22-29.
  17. N. T. Younis, “Assembly Stress for the Reduction of Stress Concentration,” Mechanics Research Communications, Vol. 33, pp. 837-845.
  18. R. Qiang, J. Chen, T. Zhao, K. Han, A. Ruiz, P. Ruchhoeft, and M. Morgan, "Effects of Manufacturing Artifacts on Infrared Filter Performance," Microwave and Optical Technology Letters, Vol. 48, Issue 9, Page 1749-1754, 2006.
Last modified 08/06/08